Harvest Thermal - Measurement and Verification Plan
Executive Summary
Section titled “Executive Summary”This document outlines the measurement and verification (M&V) methodology and data intake requirements for the electrification projects managed by Harvest Thermal. The plan encompasses baseline establishment, metering infrastructure, data collection protocols, and savings calculation methodologies.
Evidence of Asset
Section titled “Evidence of Asset”Harvest Thermal will upload a photo of a receipt of each Asset that will include the line-item of the subsidy provided by this program. They will also need to include the heat pump serial number on Asset upload.
Methodology Selection
Section titled “Methodology Selection”We will use the Device-Level Sensors for Electrification methodology.
We expect to receive device-level reporting data (Baseline: 1.1.1, Reporting: 1.2.1), and a fixed prior-fuel efficiency factor to estimate the counterfactual data. We will assume that the UEF of the pre-intervention appliance(s) is 0.63, based on the DOE standard for high-flow water heaters. The space heating uses the same heating source as the water, so the same UEF is applied to both space and water heating. Fan use will be assumed to be the same in both the baseline and reporting periods.
Data Requirements
Section titled “Data Requirements”Incorporated Data Requirements
Section titled “Incorporated Data Requirements”The following are defined in the Shared Guidelines methodology:
- Definitions
- Electricity Carbon Intensity Calculations
- Shared Data Intake Requirements
- Consequential Carbon Accounting Rules
- EAC Definition and Rules
- Generated Versus Avoided Emissions
User-Provided Data Requirements
Section titled “User-Provided Data Requirements”The following is a static description of the required and optional fields for a given Asset. See the updated CSV template with the correct column names and timeseries description.
Attributional Data
Section titled “Attributional Data”The following data is required in addition to what is listed in Shared Guidelines methodology.
General Building Characteristics
Section titled “General Building Characteristics”| Field | Description | Default if not provided | Required? | Use |
|---|---|---|---|---|
| Square Footage of Living Space | Total conditioned living area of the building in square feet | - | Y | Modeling |
| Do walls have insulation? | Indicates presence of wall insulation in the building | Yes | - | Modeling |
| Alternative Fuel to Electrification | Identifies the fuel type that would have been used if electrification was not implemented | Natural Gas | - | Modeling |
| Building Type | Classification of building according to NREL ResStock categories | - | Y | Modeling |
| Year Built | Year the building was originally constructed | - | Y | Modeling |
| # of Stories | Total number of above-ground floors in the building | - | Y | Modeling |
| Likely Heating Thermostat Setpoint (°F) | Expected temperature setting for heating system operation | - | - | Modeling |
Intervention
Section titled “Intervention”| Field | Description | Default if not provided | Required? | Use |
|---|---|---|---|---|
| Commenced Operation Date | Date when the electrification system installation was completed and began operation | - | Y | Modeling |
| Physical Serial Number | Serial number of the installed heat pump | - | Y | Verification |
| Heating Backup System | Description of any secondary or backup heating system installed | - | - | Modeling |
| Furnace Replacement? | Indicates if an electric furnace was installed to replace existing heating system | - | Y | Modeling |
| Water Heater Replacement? | Indicates if an electric water heater was installed to replace existing unit | - | Y | Modeling |
| Oven Replacement? | Indicates if an electric oven was installed to replace existing appliance | - | Y | Modeling |
| Dryer Replacement? | Indicates if an electric clothes dryer was installed to replace existing appliance | - | Y | Modeling |
| Pool Heater Replacement? | Indicates if an electric pool heater was installed to replace existing system | - | Y | Modeling |
| Additional EE Work Done During Install? | Identifies any energy efficiency improvements made during electrification (None, Basic, Enhanced) | None | - | Modeling |
| Effective Useful Life (Years) | Expected operational lifespan of installed electrification equipment | 15 | - | EAC Attribution |
| Rated for Cold Climates? | Indicates if the installed equipment is rated for operation in cold climate conditions | No | - | EAC Attribution |
Timeseries Data
Section titled “Timeseries Data”| Field | Description | Required |
|---|---|---|
| datetime | The date and time representing the end of the interval | Y |
| DF1 | Flow rate of water into tank / domestic hot water pre-mix | Y |
| DF2 | Flow rate of water through hydronic coil | Y |
| DF3 | Flow rate of water from HPWH | Y |
| T1 | Temperature of hot water to hydronic coil and domestic hot water pre-mixing valve | Y |
| T2 | Temperature of utility cold water into tank | Y |
| T3 | Temperature of water returned from hydronic coil | Y |
| T4 | Tank temperature sensor | Y |
| T5 | Temperature of water returned to HPWH | Y |
| T6 | Temperature of water supplied from HPWH | Y |
| T10 | Temperature of post-mixing valve domestic hot water | Y |
| T_RAT | Temperature of Return Air to the Air Handler = Indoor Ambient Air Temperature when the fan is running and the ventilator is not | Y |
| P1 | Heat pump power | Y |
| P2 | Fan power | Y |
| D_In_Wire_G | Thermostat call for fan | Y |
| D_In_Wire_W1 | Thermostat call for heat stage 1 | Y |
| D_In_Wire_W2 | Thermostat call for heat stage 2 | Y |
Data Management/Auditing Agreements
Section titled “Data Management/Auditing Agreements”Harvest Thermal will supply the device telemetry data used in this analysis. The data will be made available through an API endpoint and fetched on a nightly basis. Savings calculations will be rerun nightly to generate EACs.